2026-10-08 · 5 min read
Subaru BRZ Puspakom Inspection Guide Malaysia
Preparing your Subaru BRZ for a Puspakom inspection in Malaysia requires ensuring all safety systems are functional, including ABS, VDC, and airbags with no warning lights. Aftermarket modifications such as lowered suspension, non-standard exhaust, and non-OEM wheels may attract scrutiny during the inspection. Ensure all lighting, horns, wipers, and seat belts are in full working order. The BRZ's sports car design means ground clearance on very low suspension setups can be an issue on inspection ramps. Consult your workshop beforehand if the car has performance modifications.
Subaru BRZ Puspakom Inspection Guide
- BRZ Puspakom: sports car with lower ride height than sedans; ensure ride height is not below JPJ minimum ground clearance; lowered BRZ on coilovers may need ride height raised before inspection; check window tint VLT compliance (sports cars often over-tinted)
- BRZ tyre tread: BRZ driven hard on track may wear tyres unevenly or below minimum; check tread depth on all 4 corners before Puspakom; replace tyres below 1.6 mm before inspection; rear-drive means rear tyre wear can be higher
- BRZ lights Puspakom: BRZ aftermarket headlights (projectors, LEDs) must use type-approved bulbs; projector retrofit without type approval may fail Puspakom; check that HID or LED conversion is type-approved in Malaysia