2026-10-08 · 5 min read
Mitsubishi Outlander ABS Warning Light Malaysia
When the ABS warning light illuminates on the Outlander, the anti-lock braking and stability systems are disabled — normal braking still works but you lose ABS protection. The most common causes are a faulty wheel speed sensor (especially after driving through floods, which are common in Malaysia) or a dirty sensor that needs cleaning. The S-AWC system relies on the same wheel speed sensors, so an ABS fault may also trigger S-AWC or traction control warnings simultaneously. A scan tool reading is required to identify which sensor or circuit has failed.
The ABS (Anti-lock Braking System) warning light means the system has detected a fault and has disabled itself. Your brakes still work — but you lose the anti-lock function that prevents wheel lock-up during emergency stops. In Malaysia's wet roads and heavy traffic, this is a safety issue worth fixing promptly.
Common causes of ABS light
- Wheel speed sensor fault (most common) — sensor dirty, damaged, or failed
- ABS reluctor ring (tone ring) damaged — the toothed ring that the sensor reads
- Low brake fluid level triggering combined ABS/brake warning
- ABS pump or control module fault — less common but more expensive to fix
- Corroded or broken wiring to wheel speed sensors — common on older cars
Diagnosis and repair cost
Wheel speed sensor replacement: RM 150–400 per corner including the sensor and labour. ABS reluctor ring: RM 80–250 per wheel. The control module is expensive — RM 800–2,500 for most cars — but module faults are the minority of ABS issues.
At 4M Car Care, we scan all four wheel speed sensors simultaneously and pinpoint which corner has the issue before any parts are ordered. This prevents unnecessary replacements.